Hollis 2 inch Brass SPG

Hollis 2 inch Brass SPG
Our PriceUS$120.95
Code204.2310
Shipping:This item ships FREE!
Save wishlist
Add to comparison chart | Compare Products

The Hollis 2 inch Brass SPG is rugged and easy to read. It works great as a primary or backup pressure gauge. The Hollis 2 inch Brass SPG is for the beginner or the most advanced technical divers. The Hollis 2 inch Brass SPG Comes with a Luminescent face plate with an operating range of 0 to 5000 PSI or even an option for 0 to 360 BAR. The Hollis 2 inch Brass SPG has a chrome plated brass housing and uses a bourdon tube for calibration and accuracy. Equipped with scratch resistant glass. The Hollis 2 inch Brass SPG is oxygen cleaned for use of pure Oxygen or specialty blends for stage and deco bottles or just plain old Nitrox mixes.


Hollis 2 inch Brass SPG Special Features:
Luminescent Face plate
Standard with Air Spool & Viton O-rings
Oxygen Clean
Available in 0-5000 PSI or 0-360 BAR
Chrome-plated brass housing w/ Bourdon tube
Scratch resistant Tempered Glass
2 in./50.8mm size

Hollis 2 inch Brass SPG Available Options:
Measurement - Imperial PSI or Metric BAR
Please review these other products:

 
Hollis F1 Fins
View
Power without compromise. The Hollis F1 Fins blend graceful movement, power, and bulletproof construction. Meet the new standard in diving.

click to see more

 
 
Oceanic Swiv SPG Pressure Gauge
View
Modular flexibility. The SWIV SPG is an accurate and reliable submersible pressure gauge rated to 5,000 psi. Available as a stand-alone gauge or in any Oceanic SWIV console.

click to see more

 
 
XS Scuba Turtle Fins
View

The XS Scuba Turtle Fins have always been a classic favorite among avid diver as well as tech divers. New as of 2015 you can order with spring straps installed. The XS Scuba Turtle Fins are constructed using compression molded rubber so will last through even the most rigorous conditions.

click to see more

 
 
XS Scuba High Pressure QD Adapter
View
Add the XS Scuba High Pressure QD Adapter to any pressure gauge, console or air integrated console which uses a standard high pressure hose. This will allow you to easily remove your console from the hose for safe storage. The XS Scuba High Pressure QD Adapter uses a Bayonet mount style quick disconnect (push in and turn).

click to see more

 
 
XS Scuba Airspool by Highland
View
The XS Scuba Airspool by Highland is required between all high pressure hoses and any scuba SPG, this allows the gauge to spin on the hose as well as keeps the seal. The XS Scuba Airspool by Highland is made up of brass. There are two versions of the airspool, the black disc airspool with viton o-rings which is typically used with tech gauges as well as gauges with a smaller thread span. The polished straight airspool will be more commonly used on standard scuba pressure gauges and consoles.

click to see more

 
 
Hollis F1 LT Fins
View The Hollis F1 LT Fins are the same as the standard Hollis F1 Fins except they trimmed them to be a bit shorter for easier clearance and tight environments and made them more buoyant to lighten the load under water. The Hollis F1 LT Fins have the Power without compromise.

click to see more

 
No recommended products at the moment.