Dive Rite Scalloped Thumbwheels

Dive Rite Scalloped Thumbwheels
Our PriceUS$13.00
CodeGM1040
Save wishlist

The Dive Rite Scalloped Thumbwheels are a superior alternative to using standard wing nuts for securing a backplate to a set of doubles, a rebreather, or a single tank adapter. CNC machined from solid Delrin rod, these The Dive Rite Scalloped Thumbwheels are incredibly strong and fast and easy to install. The threaded hole is counterbored to speed installation and greatly reduce the possibility of crossthreading. Simply drop into place and give them a quick spin. The tri-scalloped design makes tightening a breeze and is easy to grip, even with cold, wet hands.

Unlike metal wing nuts, you do not have to worry about these thumbwheels seizing—even if the male threads are less than perfect. The wide base completely eliminates the need for washers and eliminates any wear from metal-to-metal contact. The flat top is comfortable against the back and easy on exposure suits.

These The Dive Rite Scalloped Thumbwheels are threaded 5/16-18 and fit most standard bolt kits. They are 100% designed and produced in the USA.



The Dive Rite Scalloped Thumbwheels Technical Specifications:
Sold as a Pair
CNC machined from solid Delrin rod
5/16-18 thread
4 oz (11.3 g) each
1 in (2.54 cm) in diameter
Made in the USA

Please review these other products:

 
Dive Rite Tank Bands and Bolts
View
Dive Rite Tank Bands and Bolts are tungsten inert gas welded (TIG) and have beveled edges that minimize scratching of painted tanks during assembly. They are constructed of 18-gauge, 304 stainless steel, with a #3 polished finish and 11-gauge, 304 stainless steel structural plates. 304 stainless steel is a high grade, low carbon alloy that resists corrosion, even in saltwater.

click to see more

 
 
Dive Rite 200 Bar Manifold
The Dive Rite 200 Bar Manifold uses two barrel o-rings to seal either end of the cross-bar, which provides better shock absorption and redundancy compared to the old-style metal-to-metal seal manifolds. The Dive Rite 200 Bar Manifold has a 180mm isolation crossbar that fits both 7.25-inch and 8-inch diameter tanks and recessed burst disks are protected from accidental shearing.
Our Price: US$270.00

click to see more

 
The Dive Rite 200 Bar Manifold uses two barrel o-rings to seal either end of the cross-bar, which provides better shock absorption and redundancy compared to the old-style metal-to-metal seal manifolds. The Dive Rite 200 Bar Manifold has a 180mm isolation crossbar that fits both 7.25-inch and 8-inch diameter tanks and recessed burst disks are protected from accidental shearing.
Our Price: US$270.00

click to see more

 
Dive Rite Transpac Stabilizer Plates for Doubles
The stainless steel Dive Rite Transpac Stabilizer Plates for Doubles firmly secure a TransPac to any set of double tanks that use industry-standard bands and bolts.
Our Price: US$16.50

click to see more

 
The stainless steel Dive Rite Transpac Stabilizer Plates for Doubles firmly secure a TransPac to any set of double tanks that use industry-standard bands and bolts.
Our Price: US$16.50

click to see more

 
Highland Twin Cylinder Bands
View
The Highland Twin Cylinder Bands are the best in the business when it comes to tank bands, and we now carry both 7.25'' and 8'' bands. Highland Twin Cylinder Bands comes with Stainless steel mounting hardware. The Highland Twin Cylinder Bands are Precision manufactured to the exact specifications of Joe McGrath's original Highland Millworks bands. every pair of Highland Twin Cylinder Bands are deburred and polished to protect your cylinders exterior finish.

click to see more

 
 
HOG Stainless Steel Backplate
The HOG Stainless Steel Backplate has tank cam band slots, doubles mounting slot, and a crotch strap slot. The HOG Stainless Steel Backplate weighs 6Lbs. The HOG Stainless Steel Backplate are designed with 1.0-inch and 2.0-inc Our Price: US$109.95

click to see more

 
The HOG Stainless Steel Backplate has tank cam band slots, doubles mounting slot, and a crotch strap slot. The HOG Stainless Steel Backplate weighs 6Lbs. The HOG Stainless Steel Backplate are designed with 1.0-inch and 2.0-inc
Our Price: US$109.95

click to see more

 
Zeagle 6.5 inch Bolt Kit for 8 Bands
The Zeagle 6.5 inch Bolt Kit for 8" Bands are a pair of 6.5" long stainless steel bolts complete with 3 hex nuts, 2 washers and 1 Wing Nut on each to fasten the bands. These are required in order to attach you BCD or Backplate to the Zeagle Twin Bands for Dual 8 inch Cylinders.
Our Price: US$21.95

click to see more

 
The Zeagle 6.5 inch Bolt Kit for 8" Bands are a pair of 6.5" long stainless steel bolts complete with 3 hex nuts, 2 washers and 1 Wing Nut on each to fasten the bands. These are required in order to attach you BCD or Backplate to the Zeagle Twin Bands for Dual 8 inch Cylinders.
Our Price: US$21.95

click to see more

 
Zeagle Twin Cylinder Mounting Plates
Zeagle Twin Cylinder Mounting Plates are an alternative to a full metal backplate when mounting twin cylinders to your Zeagle BC. Mounted in the same location as a metal backplate, these mounting plates distribute the weight of the cylinders so as not to damage or stress the material of the BC vest while on the surface.

Our Price: US$44.95

click to see more

 
Zeagle Twin Cylinder Mounting Plates are an alternative to a full metal backplate when mounting twin cylinders to your Zeagle BC. Mounted in the same location as a metal backplate, these mounting plates distribute the weight of the cylinders so as not to damage or stress the material of the BC vest while on the surface.

Our Price: US$44.95

click to see more

 
Dive Rite 200 Bar valve
View
Dive Rite 200 Bar valves are chrome-plated brass for rugged protection and durability. Double o-ring seals provide redundancy as well as better shock absorption. Ribbed rubber hand wheels are tough, yet easy to open and close. The left valve paired with the right valve can be used for independent doubles, a doubles manifold, sidemount, and rebreather cylinders.

click to see more

 
No recommended products at the moment.