Dive Rite BC Hose Quick Disconnect Adapter

Dive Rite BC Hose Quick Disconnect Adapter
Our PriceUS$20.00
CodeHOAD11
Save wishlist
Add to comparison chart | Compare Products

Hose routing for sidemount diving is made even easier with the Dive Rite BC Hose Quick Disconnect Adapter. If the power inflator on your sidemount rig doesn't sit flat against your chest or is difficult to manage because your low pressure inflator hose is routed from underneath, the Dive Rite BC Hose Quick Disconnect Adapter is the solution. When used in combination with a short low pressure inflator hose routed from the first stage of the left side cylinder, the low pressure inflator hose running to the power inflator is easily attached, allowing for a streamlined, over the shoulder routing of the inflator hose. The over the shoulder configuration makes the power inflator lie flat on the diver's chest and becomes easier to manage. The Dive Rite BC Hose Quick Disconnect Adapter fitting makes connecting and disconnecting the low pressure inflator hose just as easy as it would be if it was on the power inflator.


Dive Rite BC Hose Quick Disconnect Adapter Technical Specifications:
3/8″ Female fitting to LPI nipple
Chrome plated brass construction
1.5″ x 5/8″ (3.8cm x 1.6cm)
0.6 oz (17 g)


Dive Rite BC Hose Quick Disconnect Adapter Tips:
Low pressure inflator hose lengths used in this configuration will vary by individual diver preference. Configurations used by Dive Rite staff have a 15″ LPI hose coming from the first stage, and a 27″ LPI routed from the quick disconnect adapter to the power inflator.

When using this configuration for sidemount, the low pressure inflator hose running to the power inflator will be attached before the diver clips into their cylinders. Adding a small bolt snap using a hose clip retainer to the inflator hose close to the adapter will provide a way to secure the hose to the ring bungee. This will make finding the hose easy for the diver, even if the hose cannot be seen.

Use bungee to secure the LPI hose, connected to power inflator, to the corrugated inflator hose.
Please review these other products:

 
AA48 Scuba Hose Adapter
For those regulators that have 1/2 ports now you can use this AA48 1/2 male to 3/8 female Scuba Hose Adapter to connect any hose with a 3/8 fitting. Our Price: US$6.95

click to see more

 
For those regulators that have 1/2 ports now you can use this AA48 1/2 male to 3/8 female Scuba Hose Adapter to connect any hose with a 3/8 fitting.
Our Price: US$6.95

click to see more

 
Ocean Reef Extraflex Quick Connect Hose
View
The Ocean Reef Extraflex Quick Connect Hose allows for quick and easy connection and disconnection at the 2nd stage. The Ocean Reef Extraflex Quick Connect Hose made with a four layer technology with an inner layer of non toxic polyurethane blend, first reinforcement in polyester, thermo-rubber jacket and polyethylene external anti scratching reinforcement. The Ocean Reef Extraflex Quick Connect Hose is available in 32 inch black and 48 inch yellow.

click to see more

 
 
XS Scuba Rebuildable & Adjustable OPV - Over Pressure Valve
The XS Scuba Rebuildable & Adjustable OPV - Over Pressure Valve is designed to expel the air in your tank when the air pressure exceeds the limit of 175-185 PSI from the factory but can easily be adjusted 150 to 250 PSI. The XS Scuba Rebuildable & Adjustable OPV - Over Pressure Valve includes a Delrin cap to protect it from getting debris inside the Allen key whole. The XS Scuba Rebuildable & Adjustable OPV - Over Pressure Valve is such a small item but in some cases can prove to be the best thing you ever did.
 Our Price: US$39.95

click to see more

 
The XS Scuba Rebuildable & Adjustable OPV - Over Pressure Valve is designed to expel the air in your tank when the air pressure exceeds the limit of 175-185 PSI from the factory but can easily be adjusted 150 to 250 PSI. The XS Scuba Rebuildable & Adjustable OPV - Over Pressure Valve includes a Delrin cap to protect it from getting debris inside the Allen key whole. The XS Scuba Rebuildable & Adjustable OPV - Over Pressure Valve is such a small item but in some cases can prove to be the best thing you ever did.
Our Price: US$39.95

click to see more

 
Miflex DS (Dual Swivel) LP Hose
View
One of the best ways to eliminate jaw fatigue from your regulator pushing out of your mouth is with a Miflex DS (Dual Swivel) LP Hose. Depending on the type of hose your replacing, you could be increasing flexibility by 300%. With the Miflex DS (Dual Swivel) LP Hose you not only get control of the flexibility of the hose but also with the twist of the fittings.

click to see more

 
 
XS Scuba 110 Degree Angle Adapter
The XS Scuba 110 Degree Angle Adapter will allow your 2nd Stage regulator to stay in the correct position while the hose can be routed downwards either under or over the arm for maximum comfort and lower profile diving to minimizing chances of getting hung up. The XS Scuba 110 Degree Angle Adapter can also work wonders as far as eliminating jaw fatigue due to your hose pushing or pulling on your 2nd stage.


 Our Price: US$37.95

click to see more

 
The XS Scuba 110 Degree Angle Adapter will allow your 2nd Stage regulator to stay in the correct position while the hose can be routed downwards either under or over the arm for maximum comfort and lower profile diving to minimizing chances of getting hung up. The XS Scuba 110 Degree Angle Adapter can also work wonders as far as eliminating jaw fatigue due to your hose pushing or pulling on your 2nd stage.


Our Price: US$37.95

click to see more

No recommended products at the moment.