XS Scuba Airspool by Highland

XS Scuba Airspool by Highland
Our PriceUS$4.95
CodeHL303
Save wishlist

The XS Scuba Airspool by Highland is required between all high pressure hoses and any scuba SPG, this allows the gauge to spin on the hose as well as keeps the seal. The XS Scuba Airspool by Highland is made up of brass. There are two versions of the airspool, the black disc airspool with viton o-rings which is typically used with tech gauges as well as gauges with a smaller thread span. The polished straight airspool will be more commonly used on standard scuba pressure gauges and consoles.


XS Scuba Airspool by Highland Features:
Required swivel between HP hose and SPG
Brass construction
Highland Disc Airspool (p/n HL303) Black or Chrome may vary! 
XS Scuba Airspool (p/n GP10)
Please review these other products:

 
XS Scuba 2" Brass and Glass SPG by Highland
View
The XS Scuba 2" Brass and Glass SPG by Highland is a full sized robust quality pressure gauge made from Nikel-plated brass with a tempered glass lens. The XS Scuba 2" Brass and Glass SPG by Highland is ready to mount directly to a high pressure hose. The airspool is included. The XS Scuba 2" Brass and Glass SPG by Highland has a bright easy to ready luminescent face with a wide 270 degree sweep from 0 to 5000 PSI or 0 to 420 BAR. The XS Scuba 2" Brass and Glass SPG by Highland also comes with a built in over pressure relief valve for safety. The high pressure hose is not included.

click to see more

 
 
Highland Mini Tech Gauge by XS Scuba
View
The Highland Mini Tech Gauge by XS Scuba can be used either as a mini gauge on a hose or as a first stage pony gauge. The Highland Mini Tech Gauge by XS Scuba has a bright white luminescent face that is easy to read with 210 degree sweep. The Highland Mini Tech Gauge by XS Scuba includes the inline gauge adapter to install on the end of a high pressure hose as well as the airspool.

click to see more

 
 
XS Scuba Inline Shut Off for First Stage
The XS Scuba Inline Shut Off for First Stage Install between first stage low pressure port and standard regulator hose. The XS Scuba Inline Shut Off for First Stage has 3/8-24 UNF male inlet to 3/8-24 UNF female outlet threads. The XS Scuba Inline Shut Off for First Stage allows you to slide the machined Delrin collar to shut off gas flow, Commonly used with rebreather systems. Prevent critical gas loss in the case of a second stage failure.

Our Price: US$42.95

click to see more

 
The XS Scuba Inline Shut Off for First Stage Install between first stage low pressure port and standard regulator hose. The XS Scuba Inline Shut Off for First Stage has 3/8-24 UNF male inlet to 3/8-24 UNF female outlet threads. The XS Scuba Inline Shut Off for First Stage allows you to slide the machined Delrin collar to shut off gas flow, Commonly used with rebreather systems. Prevent critical gas loss in the case of a second stage failure.

Our Price: US$42.95

click to see more

 
XS Scuba Regulator Hose to Regulator Hose Connector
The XS Scuba Regulator Hose to Regulator Hose Connector is used to connect two regulators together to make one longer hose. The XS Scuba Regulator Hose to Regulator Hose Connector is a much less expensive way to extend your hose rather than buying a longer hose.
Our Price: US$14.95

click to see more

 
The XS Scuba Regulator Hose to Regulator Hose Connector is used to connect two regulators together to make one longer hose. The XS Scuba Regulator Hose to Regulator Hose Connector is a much less expensive way to extend your hose rather than buying a longer hose.
Our Price: US$14.95

click to see more

 
XS Scuba Low Pressure Port Extender
With the Low Pressure Port Extender you can extend the placement of low pressure port away from first stage.  Our Price: US$14.95

click to see more

 
With the Low Pressure Port Extender you can extend the placement of low pressure port away from first stage. 
Our Price: US$14.95

click to see more

 
XS Scuba 2" Brass & Snap SPG by Highland
View
The XS Scuba 2" Brass & Snap SPG by Highland is a unique design to where it has an attachment clip integrated to the gauge. The full size robust pressure gauge has a nikel plated housing with tempered glass and it is ready to mount directly to a high pressure hose. The airspool with viton o-rings are also included with the XS Scuba 2" Brass & Snap SPG by Highland. The Gauge reads a wide 270 degree sweep from 0 to 5000 PSI or 0 to 420 BAR. The Snapbolt shackle is made from stainless steel. The XS Scuba 2" Brass & Snap SPG by Highland now has another option for attaching it to the snap bolt so that you don't have to hard mount it to your self and making it harder to break away in an emergency. You can now add a 5 piece break away strap kit to your order and they will serve to keep the brass gauge attached to your snap bolt allowing you to pull them apart if ever in an emergency.

click to see more

 
 
Highland Inline Gauge Adapter
The Highland Inline Gauge Adapter is used to mount a mini Tech gauge or any other pony gauge to the end of a standard high pressure hose. The airspool is included with the Highland Inline Gauge Adapter.

Our Price: US$17.95

click to see more

 
The Highland Inline Gauge Adapter is used to mount a mini Tech gauge or any other pony gauge to the end of a standard high pressure hose. The airspool is included with the Highland Inline Gauge Adapter.

Our Price: US$17.95

click to see more

No recommended products at the moment.