If you need a whole video arm (with the quickie base adapter) to attach your SOLA light to your Light & Motion housing. The Sola Locline Video Arm kit will do the trick!US$49.00 Details
Drop these GoPro Anti-Fog Inserts into the sides of your GoPro camera housing to prevent fogging in cold and humid environments. The GoPro Anti-Fog Inserts will last up to four uses. To dry out and reuse, heat GoPro Anti-Fog Inserts on a pan in oven at 300° F for five minutes. Store in an airtight bag. Insert into housing to prevent lens fog in cold and humid environments. An absolute must for Scuba Divers.US$14.95 Details
Machined Aluminum The DIN Regulator Cap is Machined lightweight Aluminum and comes with the retainer string. The DIN Regulator Cap comes in Red, Blue, Gold, Black and Silver!US$11.95 Details
The Cetacea BCQR1 is perhaps the most popular of all Cetacea clips sold. With a standard BCD clip to attach to any D-ring and a female 1 inch quick release buckle on the other end.US$6.95 Details
The Cetacea Mesh Bag is perfect to stick in one of your BC pockets. Folds up to almost nothing - but is perfect when you want to collect a few shells, rocks, pirate gold deblunes, etc.US$5.95 Details
Simply air up this vinyl float and insert the dive flag in the top and you're ready to dive. Chamber in the bottom of the float allows you to add water to keep it steady and upright in the water. It also has a loop in the bottom for attaching a linUS$29.95 Details
The H20 Scuba Pony Pressure Gauge measures .75 inches in diameter and reads up to 5000 PSI. This small and compact H20 Scuba Pony Pressure Gauge Attaches directly to your regulator 1st stageUS$22.95 Details
The Dive Rite Drysuit Inflation Hose is a standard 31-inch Si Tech hose with a 3/8-inch UNF thread fitting for standard low pressure regulator ports. The Dive Rite Drysuit Inflation Hose uses a quick-release connector with wings on the sleeve for easeUS$27.00 Details
The Moisture Muncher Drying Agent absorbs moisture in the air. Sealife Moisture Muncher Packs are vapor resistant and contains 3-1 unit packs of drying agent. Put one of these in your dry box or camera box to stop moisture from attacking expensive gear.US$9.95 Details
A Spare Fin Strap is something all divers should carry in their save a dive kit. When a fin strap breaks, if you don't have a spare strap around - it could mean the end of your diving for the day.US$4.95 Details
The Cetacea QRBOH2 is a quick and easy way to attach your Octo to your BCD and keep it from flailing around during your dive or dragging on the boat deck in between dives.US$5.95 Details
The Reef Anchor Hook is especially helpful for photographers because it leaves both hands free. The Reef Anchor Hook enables you to secure yourself to the reef without any effort and without damaging the reef.
Use the Light & Motion Sola Nightsea Flip3 Camera Filter with your GoPro camera to record Fluoro-diving footage! This Flip3 Camera Filter is only compatible with the GoPro Hero3 housing.
The Zeagle Brigade BCD includes 35 lb Compact Bladder with Bungies, Rear Trim Pockets, and 6 Stainless Steel D-Rings. This BCD also has Heavy Duty 1040 harness construction.US$549.95 Details
Need to give a gift and not sure what to get? or maybe you just don't like the recipient well enough to fight traffic in shopping center parking lot, Either way giving the gift of Scuba is always a hit!
It takes less than 1 business da