Aluminum 80 Tank

Aluminum 80 Tank
Our PriceUS$199.95
CodeAL80
Save wishlist

These Aluminum 80 Tanks are made from Worthington. One of the leading manufacturers in Scuba Cylinders. The Aluminum 80 Tank is the most commonly used scuba tanks. They aren't too large but not too small either. 90% of all scuba tanks out there are Aluminum 80's.

All of our tanks now come with the XS Scuba 200 bar Pro Tank Valve that utilizes a spin-out adapter to convert from DIN to yoke! The XS Scuba 200 bar Pro Tank Valve also now comes clean for pre-blended Nitrox up to 40%. This Pro 200 Tank Valve also offers the Safety Hand wheel that allows you to know at a glance if the valve is on or off. Green for open and red for closed. Very cool!

These Aluminum 80 Tanks come complete with valve, so just pick your color! Tank also includes a Visual Inspection Sticker.

We ship cylinders with the "freshest" possible hydro date. We are limited in some models/colors because of high manufacturing quantities and relatively low sales volume. Please understand that aluminum cylinders shipped to your location within 12 months of manufacturer date are considered "current hydro" and not subject to discounts.

Aluminum 80 Tanks are cleaned for oxygen and oxygen-enriched service at the factory. If you intend to use this cylinder for oxygen-enriched service (i.e. with any gas containing oxygen concentrations of 23.5% or more), all components used with the cylinder must be oxygen compatible. It is the responsibility of the cylinder user to ensure that the cylinder and all components are maintained in a proper state of oxygen cleanliness in strict accordance with regulatory requirements and industry standards.

Specifications:

  • Service Pressure - 3000PSI / 207 Bar
  • True Capacity - 77.4 cu ft / 2192 Liters
  • Buoyancy Full - -1.8lbs / -0.8kg
  • Buoyancy 500PSI - +3.2lbs / +1.5kg
  • Weight Empty (no valve) - 31.9lbs / 14.4kg
  • Outside Diameter - 7.25in / 184mm
  • Cylinder Length (no valve) - 26.1in / 663mm
  • Water Volume - 11.1 Liters

    Available Colors

  • Black
  • Blue
  • Yellow
  • Lime Green
  • Shot Blast
  • Brushed No Coat
  • Red
  • Purple
  • White


  • Looking for a different size tank? Check these tanks out instead.

    Please review these other products:

     
    Aluminum 63 Scuba Tank
    View All of our tanks now come with the XS Scuba 200 bar Pro Tank Valve that utilizes a spin-out adapter to convert from din to yoke! The XS Scuba 200 bar Pro Tank Valve also now comes clean for pre-blended Nitrox up to 40%. This Pro Vx 20

    click to see more

     
     
    Aluminum 80 Candy Color
    View All of our tanks now come with the XS Scuba 200 bar Pro Tank Valve that utilizes a spin-out adapter to convert from din to yoke! The XS Scuba 200 bar Pro Tank Valve also now comes clean for pre-blended Nitrox up to 40%. This Pro Vx 20

    click to see more

     
     
    Tank Boot
    View To protect the bottom of your tank, and to limit roll, put on a tank boot. If you're buying a tank at the same time, we'll install it for you -simply ask in your notes section at checkout.

    click to see more

     
     
    Zeagle Ranger LTD BCD
    View The Zeagle Ranger LTD BCD has been the top BCD for years. With the new model, the Ranger LTD has a new super duty Airlock buckle in the shoulder and Zeagle now uses a harness type webbing and new threading on the Ranger BCD's including the LTD- the Best.

    click to see more

     
     
    Zeagle BC Knife with Sheath
    The Sheath from the Zeagle BC Knife with sheath is permanently mounted to any webbing strap. To attach the sheath, locate the plastic rivet stems that protrude from the back of the sheath. Determine where you would like the sheath to be mounted. Mark the location and using a hole punch or small soldering iron place a hole just large enough to stick the rivet stem through. Push the rivet stems through the holes and snap the female caps (included) onto the stems. NOTE: These rivets are designed for permanent installation and must be broken in order to be removed.
    Our Price: US$42.95

    click to see more

     
    The Sheath from the Zeagle BC Knife with sheath is permanently mounted to any webbing strap. To attach the sheath, locate the plastic rivet stems that protrude from the back of the sheath. Determine where you would like the sheath to be mounted. Mark the location and using a hole punch or small soldering iron place a hole just large enough to stick the rivet stem through. Push the rivet stems through the holes and snap the female caps (included) onto the stems. NOTE: These rivets are designed for permanent installation and must be broken in order to be removed.
    Our Price: US$42.95

    click to see more

     
    XS Scuba Modular Pro Valve
    View
    The XS Scuba Modular Pro Valve is a just like the XS Scuba Pro Valve with Standard yoke outlet with a spin out insert for 230 BAR outlets but the difference is that the XS Scuba Modular Pro Valve has a modular access plug that can be removed allowing you to insert either an isolator crossbar or an H-Valve adapter, both which would allow for the attachment of a secondary regulator and or tank. The XS Scuba Modular Pro Valve has a 3/4"-14 NPSM standard inlet thread for attaching to the Tank neck. The Valves are pre-cleaned for Nitrox up to 40%.

    click to see more

     
     
    XS Scuba Console Retractor CL17

    The XS Scuba Console Retractor is a mini retractor size designed for the proper extension and pull for gauge consoles. You attach the XS Scuba Console Retractor to a diver with Delrin snap hook or threaded stud and attach to console with stainless steel split ring or nylon lanyard. The XS Scuba Console Retractor has a built in quick release buckle and has a coated stainless steel cable with extension length of 18" (45.7 kg) and pull force of 20 ounces (.57 kg). The dimensions are 2.0" x 1.5" x 6" (5 x 3.8 x 1.5 cm).

    Our Price: US$27.95

    click to see more

     

    The XS Scuba Console Retractor is a mini retractor size designed for the proper extension and pull for gauge consoles. You attach the XS Scuba Console Retractor to a diver with Delrin snap hook or threaded stud and attach to console with stainless steel split ring or nylon lanyard. The XS Scuba Console Retractor has a built in quick release buckle and has a coated stainless steel cable with extension length of 18" (45.7 kg) and pull force of 20 ounces (.57 kg). The dimensions are 2.0" x 1.5" x 6" (5 x 3.8 x 1.5 cm).

    Our Price: US$27.95

    click to see more

     
    Dive Rite Octopus Holder
    For safety, always have your Octopus (Alternate Air Source) available and close at hand. The Dive Rite Octopus Holder is a Plastic non-corrosive clip that has a self locking spring lock for positive retention with a 360 degree swivel, a short nylon strip of webbing and a rubber loop for attaching clip to your octopus mount piece.
    Our Price: US$5.75

    click to see more

     
    For safety, always have your Octopus (Alternate Air Source) available and close at hand. The Dive Rite Octopus Holder is a Plastic non-corrosive clip that has a self locking spring lock for positive retention with a 360 degree swivel, a short nylon strip of webbing and a rubber loop for attaching clip to your octopus mount piece.
    Our Price: US$5.75

    click to see more