Miflex Xtreme Low Pressure Braided Regulator Hoses feature an external nylon safety braiding designed to resist the snags and abrasions that divers can often encounter. The patent Pending XTREME double braiding also resists UV rays out of the water, thus extending the lifespan of the hose.
Unlike traditional hoses, the XTREME nylon safety braiding is not simply pushed over the hose fittings. Instead the braiding is tightly bound and fixed to the hose core by stainless steel or brass sleeve.
The Miflex Xtreme Low Pressure Braided Regulator Hoses also achieves a higher burst pressure almost double when compared to traditional hoses.
In the event of a physical breach, Miflex Xtreme Low Pressure Braided Regulator Hoses actually work to reduce the amount of air lost. How? The advanced XTREME nylon safety braiding actively shrinks under pressure, reducing the rate of air loss and buying valuable time.
You can get the Miflex hoses in such a large variety of colors it makes it easy for those families or dive teams with multiple divers to differentiate between each persons gear.
Miflex Xtreme Low Pressure Braided Regulator Hoses Compatibility:
3/8"-24 UNF Male to 9/16"-18 UNF Female
Miflex Xtreme Low Pressure Braided Regulator Hoses Available Colors and Sizes:
6 Inch Black
9 Inch Black
18 Inch Black
22 Inch Black
24 Inch Black
26 Inch Black, Blue
30 Inch Black, Blue, Carbon, Pink, Purple, Red, White, Hi-Vis Yellow
36 Inch Black, Blue, Mellow Yellow, Hi-Vis Yellow
40 Inch Black, Blue, Green, Mellow Yellow, Hi-Vis Yellow
44 Inch Black
48 Inch Black
60 Inch Black
84 Inch Black, Blue, Hi-Vis Yellow
300 Inch Black
600 Inch Black
1200 Inch Black
11 Inch Black Rebreather Hose 3/8" UNF Male to 3/8" UNF Male
Extreme Abrasion Resistance:
MIFLEX hoses feature an external nylon safety braiding designed to outperform and outlive traditional rubber hoses
Two styles: Regulator low pressure and BC quick-disconnect hoses
Patent-pending MIFLEX double braiding design
Polyurethane compound liner
Polyester inner layer with nylon outer layer braiding
Fittings and sleeves of UNI EN12164 CW 614N chrome plated brass
MIFLEX braided hoses are tightly bound and fixed to the hose core by brass sleeves
Double braiding also resists UV rays out of the water, extending the life span of the hose
Lightweight and Flexible:
More than 30% lighter in weight when compared to rubber hoses of the same length
Kink-resistant design
Tie an MIFLEX hose into a tight knot and the flow of air remains continuous through the hose
Manufacturing
Made in Italy
Minimum burst pressure exceeding 250 BAR (over 3600 psi) more than twice that of most rubber hoses
Automated assembly and testing lines designed and manufactured exclusively for MIFLEX
Each and every MIFLEX hose is subjected to more than 30 individual performance and safety tests
Certified and tested to EN250 Standard
Fitting have 5.2 mm internal bore
Hose diameter – External 12 mm, Internal 6.5mm
If you need the Miflex hoses for the other parts of your regulator setup, we also sell the
Miflex Low Pressure Quick Disconnect Inflator Hoses and the
Miflex High Pressure Carbon HD Hoses