This manual contains preliminary servicing instructions for the Poseidon breathing regulators. It is
intended to serve as a guide for repairs and servicing carried out by Poseidon Diving Systems. The
instructions given in this manual are based on the assumption that special tools are used and are
based on our experience. The work should be done in the same order as shown in these instructions.
TYPE DESIGNATIONS:
In all correspondence concerning breathing regulators, indicate the type designation and serial
number. All products in this servicemanual that requires a CE-approval are of course CE-approved. CE
approval represents only a minimum level of product quality and manufacturing standards. At
Poseidon we put each new addition through rigorious testing procedures our selves. This is the only
proper method to ensure that your equipment will live up to our claims.
CLEANING:
If corrosion or salt deposits occurs, place all metal parts concentrated Hempocid* or 15%
Hydrochloric acid for about 10 minutes. Then, rince the parts thoroughly and blow dry with air.
The synthetic parts in the second stage must not be treated with solvent. They shall be cleaned in
freshwater only.
*Hempocid = Acid Liquid Detergent Containing phosphoric acid (5 - 10%)
and bactericid for desinfectant cleaning.
FOLLOWING LUBRICATE IS USED:
Grease:
Gleitmo 594 Art no 8507
Siliconpasta Art no 2587
Oil:
Siliconoil Art no 3139