XS Scuba Hose Hook

XS Scuba Hose Hook
Our PriceUS$17.95
CodeAC956
Save wishlist
Add to comparison chart | Compare Products

The XS Scuba Hose Hook is the new modern alternative way to attaching snap bolts and other attachments to your hoses. For ever and a day we have been using cave line and wrapping the hose to attach snap bolts and clips to our hoses. This can cause damage to the outside as well as the inside depending on how tight the line is tied. The new XS Scuba Hose Hook will alleviate all of that potential damage as well as makes for a more secure attachment. The XS Scuba Hose Hook is for use with all low pressure scuba hoses with an approximate 0.5" diameter.
  
         
XS Scuba Hose Hook Features:

Secure attachment of a clip without causing potential damage to the hose

For use with all low pressure scuba hoses with an approximate 0.5” diameter



XS Scuba Hose Hook Available Option:

You can also add on the Break Away strap kit that will allow you to attach your snap bolt to your hose with the ability to pull apart in the case of an emergency tangle. The Break Away Strap Kit needs 30-35lb of strength to break them apart. Making it secure enough to support your gear while still being easy enough to break away when in need. You can see how the break away strap kit works as illustrated in the images above.

Please review these other products:

 
Dive Rite Small Swivel Bolt Snap
Made of marine grade 316 stainless steel, The Dive Rite Small Swivel Bolt Snap is designed for saltwater use and feature swiveling bases for ease of connection. Each Dive Rite Small Swivel Bolt Snap is meticulously inspected at the Dive Rite factory to ensure smooth edges that won't cut fingers and that gates open and shut reliably.

 Our Price: US$11.50

click to see more

 
Made of marine grade 316 stainless steel, The Dive Rite Small Swivel Bolt Snap is designed for saltwater use and feature swiveling bases for ease of connection. Each Dive Rite Small Swivel Bolt Snap is meticulously inspected at the Dive Rite factory to ensure smooth edges that won't cut fingers and that gates open and shut reliably.

Our Price: US$11.50

click to see more

 
XS Scuba Hose Clip
View
The XS Scuba Hose Clip will fit most low and high pressure hoses. The XS Scuba Hose Clip is just as it sounds, a clip to hold your hose close and tight and out of the way. The body of the XS Scuba Hose Clip is made up of delrin, and with the stainless steel gate it will easily attach to just about anything.

click to see more

 
 
XS Scuba 2" Brass & Snap SPG by Highland
View
The XS Scuba 2" Brass & Snap SPG by Highland is a unique design to where it has an attachment clip integrated to the gauge. The full size robust pressure gauge has a nikel plated housing with tempered glass and it is ready to mount directly to a high pressure hose. The airspool with viton o-rings are also included with the XS Scuba 2" Brass & Snap SPG by Highland. The Gauge reads a wide 270 degree sweep from 0 to 5000 PSI or 0 to 420 BAR. The Snapbolt shackle is made from stainless steel. The XS Scuba 2" Brass & Snap SPG by Highland now has another option for attaching it to the snap bolt so that you don't have to hard mount it to your self and making it harder to break away in an emergency. You can now add a 5 piece break away strap kit to your order and they will serve to keep the brass gauge attached to your snap bolt allowing you to pull them apart if ever in an emergency.

click to see more

 
 
Dive Log Book Pages
View The Dive Log Book Pages will fit in most small 3 or 6 ring binders! Or our Zipper Dive Log Book. Each page measures 8.5" x 5.5". You can either choose the log boo

click to see more

 
 
Zipper Dive Log Book
View This 3 ring zippered binder has room for bunches of dive log pages. There are also pockets for your C-card, pens, dive tables, etc and comes with a set of the dive log book starter pages.

Again covered with blatant advertising

click to see more

 
 
XS Scuba 3.5" Doublender Bolt Snap

The XS Scuba 3.5" Doublender Bolt Snap is perfect for attaching just about anything. Made of 316 Grade Stainless Steel with 18-8 "Rust-Free" Stainless Steel Internal Spring.

 Our Price: US$8.95

click to see more

 

The XS Scuba 3.5" Doublender Bolt Snap is perfect for attaching just about anything. Made of 316 Grade Stainless Steel with 18-8 "Rust-Free" Stainless Steel Internal Spring.

Our Price: US$8.95

click to see more

 
Trident 10 Piece Viton Save A Dive Kit O-Ring Kit

The Trident 10 Piece Viton Save A Dive Kit O-Ring Kit is something that every diver should carry with them. It contains 10 Viton O-Rings with the most popular O-ring used for tank valves, hoses, regulators, gauges, cameras and much more. The Trident 10 Piece Viton Save A Dive Kit O-Ring Kit is perfect for most Nitrox systems.

 Our Price: US$12.95

click to see more

 

The Trident 10 Piece Viton Save A Dive Kit O-Ring Kit is something that every diver should carry with them. It contains 10 Viton O-Rings with the most popular O-ring used for tank valves, hoses, regulators, gauges, cameras and much more. The Trident 10 Piece Viton Save A Dive Kit O-Ring Kit is perfect for most Nitrox systems.

Our Price: US$12.95

click to see more

 
Amphibious Outfitters Scuba Frog T-Shirt Black
View
The Amphibious Outfitters Scuba Frog T-Shirt Black is 100% Pre-Shrunk Cotton T-Shirt. Amphibious Outfitters have been making the industries favorite T-Shirts for over 20 years and still manage to come out with new designs each year that appeal to all from recreational to hard core professional divers.

click to see more