We have put together a great deal on a BackPlate and Wing Package
. We start with the Dive Rite Basic Harness
, or you upgrade to the Dive Rite Deluxe Harness
. Then for the Backplate we chose the Dive Rite XT Lite BackPlate at 2 lbs 9 oz it makes this Backplate and Wing
as light as they get! We went with the Hog 23lb Single Tank Wing
that offers 23 lbs of lift and if you need more lift then look at the HOG 32Lb Wing
! We also toss in two of the Dive Rite Stainless Steel Cam Latch Tank Straps
Dive Rite Basic Harness Details:
For those who prefer a streamlined rig without buckles, chest strap or padding, the Dive Rite Basic Harness
is a clean, simple harness intended for use with hard metal backplates. 2 inch (50mm) nylon webbing provides strength, yet is soft and won't dig into the body. The Dive Rite Basic Harness
is adjustable by cutting off excess webbing once diver has sized the harness to his body stature. Standard 2 inch webbing allows for customization with a wide variety of pockets and accessories, depending on the needs and desires of the individual diver. Tubular webbing sleeves are included for all points where webbing comes into contact with the backplate to prevent abrasion. Includes marine-grade stainless steel hardware. Made in the U.S.A.
Eleven feet of 2 inch (50mm) nylon webbing is rated at 7,000 lbs breaking strength and includes a stainless steel grommet at the midpoint for access to upper bolt hole
Marine Grade 316 stainless steel hardware is used throughout including: (2) bent, shoulder D-rings, (2) waist D-rings (1) grommet and (1) stainless steel belt buckle.
1lb 2oz (0.53kg)
Dive Rite XT Lite Backplate Details:
The next generation of lightweight backplates has arrived. Dive Rite has taken the reliability of the stainless steel backplate and combined it with the light weight characteristics of non-stainless steel backplates. The new Dive Rite XT Lite Backplate is constructed from 16 guage 316L grade stainless steel, which is a low carbon, rust resistant grade of stainless. A series of cut-outs along the body of the plate reduce its overall weight while still maintaining the support needed for the heaviest of double cylinder configurations. All edges are laser cut, and individually finished by hand to ensure that there are no rough or jagged edges anywhere on the plate.
The Dive Rite XT Lite Backplate is configures with 11" on center mounting holes to accommodate standard double tank bolt kits, including two holes for the upper bolt to give adjustability of tank height. Two sets of 2" slots along the center allow divers to use the Dive Rite XT Lite Backplate for single tank diving without the need for a single tank adapter. A series of 3/8"diameter holes and 1" slots along the outer edges of the plate give different options for mounting lights, pony bottles, lift bags, and other accessories. 2" and 1" slots at the bottom center of the plate allow for any size crotch strap up to 2" in width to be used. Made in the USA.
Material: 16 Guage 316L Stainless Steel
Weight: 2lb 9.4oz
Dimensions: 10.5" (26.7cm)(widest point) x 15" (39.4cm)
Dimensions: 1.25" (3.2cm) depth (with contour)
Hog 23lb Single Tank Wing Details:
The HOG 23lb Wing is the ideal choice for single cylinder diving when the lift provided is sufficent. The HOG 23lb Wing features a extremely low profile donut wing shape. The center of the HOG 23lb Wing features cam strap slots for use with backplate without a Single Tank Adapter.
23lb Lift Capacity Oval/Donut Shape
90 Degree Elbow Low Profile Design
Cam Stap Slots for use with the HOG Back Plate without a STA Center Mounted Inflator Elbow
1680 Denier Ballistic Nylon Shell
220D Inner Bladder
22 inch Inflator Hose
Dive Rite SS Cam Straps Details:
The Dive Rite SS Cam Strap with roller buckle (BC2035) uses a 2 inch wide nylon webbing with marine grade stainless steel buckle. 36 inch (91.4cm) webbing length is suitable for cylinders from 6.9 inches (17.5cm) to 8 inches (20.3cm) in diameter, which includes them most popular sizes of cylinders. Nylon rollers on the Dive Rite SS Cam Strap protect the cylinder from being scratched by the buckle, while a rubber non-slip pad prevents the cylinder from shifting once the cam buckle has been secured. Excess webbing is secured using Velcro, which will also prevent the buckle from accidentally coming open.
Lightweight, marine grade stainless steel buckle
36" (91.4cm) length of 2" webbing with 7,000 lb tensile strength
Weight: 11oz (311g)
If this package is not exactly what you are looking for then give us a call and we will put together a custom Backplate and wing package to fit your needs.
We sell a similar package with the Hollis LX25 Wing also. Check out the Dive Rite Travel Back Plate and Wing Package.