Dive Rite 200 Bar valve

Dive Rite 200 Bar valve
Our PriceUS$98.00
CodeVA3001L-200 VA3001R-200
Shipping:This item ships FREE!
Save wishlist
Add to comparison chart | Compare Products

Dive Rite 200 Bar valves are chrome-plated brass for rugged protection and durability. Double o-ring seals provide redundancy as well as better shock absorption. Ribbed rubber hand wheels are tough, yet easy to open and close. The left valve paired with the right valve can be used for independent doubles, a doubles manifold, sidemount, and rebreather cylinders. The Dive Rite 200 Bar valve is modular so divers can use them independently on single tanks, put them together to form an H-valve, or use an isolation bar to build a manifold for double tanks. All Dive Rite 200 Bar Valves come standard with 3500 psi (242 bar) working pressure relief disks, built with oxygen compatible o-rings and lubricants, and are Nitrox ready up to 40-percent.

All Dive Rite 200 Bar Valves are easliy converted between DIN and yoke by using the provided DIN to yoke insert. The insert is installed and removed with an 8mm hex key.


Dive Rite 200 Bar valve Technical Specifications:
3500 psi (242 bar) working pressure
Nitrox ready up to 40%
DIN or yoke compatible with included insert
1.85 lb (.84 kg)





NOTE: The Left Valve is the most commonly used valve for single-tank open water diving.
Please review these other products:

 
Aluminum 80 Double Tank Setup
View The Aluminum 80 Double Tank Setup comes with two Aluminum 80 Tanks, bands and a manifold.

click to see more

 
 
Aluminum DIN Valve Cap
View The Aluminum DIN Valve Cap is Machined from Light weight aluminum. The Aluminum DIN Valve Cap comes in Red, Blue, Gold, Black and Silver!

click to see more

 
 
Foam Tank Rack
View Looking for a great way to stop your tanks from rolling around in the back of the pickup - or in your trunk? Available in either a 2 Tank version (pictured), or a 3 tank version. This rack is light weight, easy to store, and does a great job of st

click to see more

 
 
HOG Aluminum Backplate
View The HOG Aluminum Backplate has tank cam band slots, doubles mounting slot, and a crotch strap slot. The HOG Aluminum Backplate weighs 2Lbs. The HOG Aluminum Backplate are designed with 1.0-inch and 2.0-inch slots to accommodate

click to see more

 
 
Dive Rite Stainless Steel Assembly Screw AKA Sex Bolts
The Dive Rite Stainless Steel Assembly Screws also know as "Sex Bolts" are used for attaching various accessories to a TransPac harness or to a hard backplate (such as lift bag pouches, suit inflation mounting systems Our Price: US$17.00

click to see more

 
The Dive Rite Stainless Steel Assembly Screws also know as "Sex Bolts" are used for attaching various accessories to a TransPac harness or to a hard backplate (such as lift bag pouches, suit inflation mounting systems
Our Price: US$17.00

click to see more

 
Thermo Pro Valve
View
The Thermo Pro Valve is a standard yoke outlet with a spin-out DIN insert which converts to 230 bar DIN outlets. The Thermo Pro Valve uses 3/4"-14 NPSM standard inlet threads. Cleaned for pre-blended Nitrox up to 40% Oxygen.

click to see more

 
 
Thermo Isolation Manifold Pro
View
The Thermo Isolation Manifold Pro is just two Thermo Modular Pro Valves, left and right with the Thermo Standard Crossbar with Isolator offering 8.5-inch adjustable center-to-center spacing that perfectly fits any diameter scuba cylinders using standard tank bands.

click to see more

 
 
Deluxe Cylinder Equalizer with Braided HP Hose
The Deluxe Cylinder Equalizer with Braided HP Hose has a easy to read 2" diameter XS Scuba gauge with a Dual dial - 0 to 5000 psi and 0 to 350 bar. Made with a stainless steel case the Deluxe Cylinder Equalizer with Braided HP Hose Our Price: US$199.95

click to see more

 
The Deluxe Cylinder Equalizer with Braided HP Hose has a easy to read 2" diameter XS Scuba gauge with a Dual dial - 0 to 5000 psi and 0 to 350 bar. Made with a stainless steel case the Deluxe Cylinder Equalizer with Braided HP Hose
Our Price: US$199.95

click to see more

 
XS Scuba DIN Fill Adapter
The XS Scuba DIN Fill Adapter is designed to connect to your DIN Tank valve and allow it to be filled using a fill whip made for filling standard yoke valves. This is a great tool to keep with you if you have a DIN tank and get your tanks filled at places you are unfamiliar with as you don't know if they have one on hand or not. The XS Scuba DIN Fill Adapter is for above water use only!
Our Price: US$44.95

click to see more

 
The XS Scuba DIN Fill Adapter is designed to connect to your DIN Tank valve and allow it to be filled using a fill whip made for filling standard yoke valves. This is a great tool to keep with you if you have a DIN tank and get your tanks filled at places you are unfamiliar with as you don't know if they have one on hand or not. The XS Scuba DIN Fill Adapter is for above water use only!
Our Price: US$44.95

click to see more

 
Thermo Modular Pro Valve
View
The Thermo Modular Pro Valve is a standard Yoke outlet Valve with spin-out DIN insert to convert it to 230 BAR DIN outlet. The modular access plug is included with the Thermo Modular Pro Valve. Equipped with the standard 3/4"-14 NPSM inlet threads it will fit most standard aluminum or steel tanks. The Thermo Modular Pro Valve is cleaned for pre-blended Nitrox up to 40% oxygen.

click to see more

 
 
Thermo Standard Crossbar with Isolator
The Thermo Standard Crossbar with Isolator is used to connect the right and left Thermo Modular DIN or Pro Valves together to build a Thermo Isolation Manifold.

 Our Price: US$79.95

click to see more

 
The Thermo Standard Crossbar with Isolator is used to connect the right and left Thermo Modular DIN or Pro Valves together to build a Thermo Isolation Manifold.

Our Price: US$79.95

click to see more

No recommended products at the moment.