Dive Rite Regulator Necklace

Dive Rite Regulator Necklace
Our PriceUS$8.50
CodeAC2099
Shipping:This item ships FREE!
Save wishlist
Add to comparison chart | Compare Products

The Dive Rite Regulator Necklace takes a new twist on a tool that technical divers have used for years to keep the back up regulator stowed under the chin. Fully adjustable, the Dive Rite Regulator Necklace can be worn by any size diver and adjusted to fall on the chest according to individual diver preference. Once your regulator is placed in the Dive Rite Regulator Necklace, just squeeze the necklace ends together and your reg will stay put and not fall out. Made from standard 3/8 inch bungee, the Dive Rite Regulator Necklace is a simple alternative that provides adjustability and ease of use as compared to the traditional bungee necklace.


Looking for the silicone regulator necklace? We also carry the Manta Regulator Necklace.
Please review these other products:

 
Dive Rite Regulator Necklace
The Dive Rite Regulator Necklace takes a new twist on a tool that technical divers have used for years to keep the back up regulator stowed under the chin. Fully adjustable, the Dive Rite Regulator Necklace can be worn by any size diver Our Price: US$8.50

click to see more

 
The Dive Rite Regulator Necklace takes a new twist on a tool that technical divers have used for years to keep the back up regulator stowed under the chin. Fully adjustable, the Dive Rite Regulator Necklace can be worn by any size diver
Our Price: US$8.50

click to see more

 
SeaCure Mouthpiece
View The SeaCure Mouthpiece is the Only mouthpiece GUARANTEED to fit you perfectly! Sea Cure offers an expanded port for increased air flow. This mouthpiece allows for easier molding. The Sea Cure is available in three sizes and is secure and comfortable.

click to see more

 
 
Scubatoys Regulator Bag
We know it is blatant advertisement with the Scubatoys.com logo on it, but there is a picture of a couple of weird guys on it too.  Our Price: US$34.95

click to see more

 
We know it is blatant advertisement with the Scubatoys.com logo on it, but there is a picture of a couple of weird guys on it too. 
Our Price: US$34.95

click to see more

 
Dive wRites Notebook Cover
The Dive wRites Notebook cover is made from ballistic nylon. Inside the Dive wRites Notebook cover are 3 non-slip pencil sleeves and a non-slip pocket for a survey compass. Along the spine is are four daisy chain loops for additional accessory attachment points. The back of the Dive wRites Notebook cover is a clear pocket to allow easy visibility of dive tables or check lists. Contents of the notebook are kept secure by a Velcro flap on the notebook cover. Made in the USA.
 Our Price: US$35.75

click to see more

 
The Dive wRites Notebook cover is made from ballistic nylon. Inside the Dive wRites Notebook cover are 3 non-slip pencil sleeves and a non-slip pocket for a survey compass. Along the spine is are four daisy chain loops for additional accessory attachment points. The back of the Dive wRites Notebook cover is a clear pocket to allow easy visibility of dive tables or check lists. Contents of the notebook are kept secure by a Velcro flap on the notebook cover. Made in the USA.
Our Price: US$35.75

click to see more

 
Dive Rite Hose Clip Retainer
If you don’t have the time or patience for tying knots then, the Dive Rite Hose Clip Retainer is the solution. This re-usable bungee with tab can be used to secure a bolt snap to a hose, a gauge or a light.
Our Price: US$3.00

click to see more

 
If you don’t have the time or patience for tying knots then, the Dive Rite Hose Clip Retainer is the solution. This re-usable bungee with tab can be used to secure a bolt snap to a hose, a gauge or a light.
Our Price: US$3.00

click to see more

 
Dive Rite Octopus Holder
For safety, always have your Octopus (Alternate Air Source) available and close at hand. The Dive Rite Octopus Holder is a Plastic non-corrosive clip that has a self locking spring lock for positive retention with a 360 degree swivel, a short nylon strip of webbing and a rubber loop for attaching clip to your octopus mount piece.
 Our Price: US$5.75

click to see more

 
For safety, always have your Octopus (Alternate Air Source) available and close at hand. The Dive Rite Octopus Holder is a Plastic non-corrosive clip that has a self locking spring lock for positive retention with a 360 degree swivel, a short nylon strip of webbing and a rubber loop for attaching clip to your octopus mount piece.
Our Price: US$5.75

click to see more

 
Dive Rite 125 Foot Finger Spool
View
In the early days of cave diving, reels were not available to buy off the shelf. Divers used anything they could, including empty electrical wire spools. When exploring, divers would pay out the line and if they didn't empty the spool it would be left in the cave for the next dive. The spools came in various sizes and North Florida cave diver, Bill Hogarth Main, popularized smaller spools for safety and jump reels. Today, the Dive Rite 125 foot Finger Spool is often used for shooting lift bags as well as a safety reel. Small and low-profile, a spool fits nicely out of the way in a pocket or clipped off to a D-ring.

click to see more

 
 
Dive Rite 16LB QB Weight Pocket System
The Dive Rite 16LB QB Weight Pocket System consists of an insert pocket that easily releases when the handle is pulled and a holster that stays securely on the waist belt.
 Our Price: US$109.00

click to see more

 
The Dive Rite 16LB QB Weight Pocket System consists of an insert pocket that easily releases when the handle is pulled and a holster that stays securely on the waist belt.
Our Price: US$109.00

click to see more

 
Dive Rite Double Bolt Snap
Made of marine grade 316 stainless steel, The Dive Rite Double Bolt Snap is designed for saltwater use. This clip features gates at both ends that allow for quick and easy temporary connection of two items.
Our Price: US$12.25

click to see more

 
Made of marine grade 316 stainless steel, The Dive Rite Double Bolt Snap is designed for saltwater use. This clip features gates at both ends that allow for quick and easy temporary connection of two items.
Our Price: US$12.25

click to see more

 
Highland Mini Tech Gauge by XS Scuba
View
The Highland Mini Tech Gauge by XS Scuba can be used either as a mini gauge on a hose or as a first stage pony gauge. The Highland Mini Tech Gauge by XS Scuba has a bright white luminescent face thats easy to read with 210 degree sweep. The Highland Mini Tech Gauge by XS Scuba includes the inline gauge adapter to install on the end of a high pressure hose as well as the airspool.

click to see more

 
 
Cetacea MCT3 Camera Tether
View The Cetacea MCT3 Camera Tether is a 2 foot long soft lanyard that has all the versatility you need, The internal coil on the Camera Tether keeps it compact and will never stretch-out. The Cetacea MCT3 is built with a stainless snap and fits all cameras.

click to see more